how to refill iget bar plus Complete Review: Features, Performance & User Experience
“`html
How to Refill the iGet Bar Plus: A Comprehensive Guide
The iGet Bar Plus is a popular disposable vape device known for its sleek design, long-lasting battery, and satisfying vaping experience. However, many users are unaware that this device can be refilled, extending its lifespan and saving money. In this guide, we’ll walk you through the step-by-step process of refilling your iGet Bar Plus, ensuring you get the most out of your device.
What You’ll Need
Before you begin, make sure you have the following items ready:
- An empty or nearly empty iGet Bar Plus device
- Your preferred e-liquid (make sure it’s compatible with the device)
- A small flathead screwdriver or a similar tool
- A paper towel or cloth for cleaning
Step-by-Step Guide to Refilling the iGet Bar Plus
Step 1: Prepare Your Workspace
Find a clean, flat surface to work on. Lay down a paper towel or cloth to catch any spills or leaks during the refilling process.
Step 2: Open the Device
Using a small flathead screwdriver, gently pry open the mouthpiece of the iGet Bar Plus. Be careful not to damage the internal components. Once the mouthpiece is removed, you’ll see the cotton wick and the coil inside.
Step 3: Remove the Rubber Plug
Locate the small rubber plug near the coil. This plug seals the e-liquid reservoir. Carefully remove the plug using your screwdriver or tweezers. Set it aside, as you’ll need to reinsert it later.
Step 4: Refill the E-Liquid
Slowly pour your preferred e-liquid into the reservoir. Be cautious not to overfill, as this can cause leaks. A good rule of thumb is to fill the reservoir to about 80% capacity. This leaves enough room for the cotton wick to absorb the liquid properly.
Step 5: Reinsert the Rubber Plug
Once the reservoir is filled, carefully reinsert the rubber plug to seal the e-liquid chamber. Ensure it’s securely in place to prevent leaks.
Step 6: Reassemble the Device
Place the mouthpiece back onto the device and press it down firmly until it clicks into place. Wipe away any excess e-liquid from the exterior of the device using a paper towel or cloth.
Step 7: Let It Sit
Allow the device to sit for 5-10 minutes to ensure the cotton wick is fully saturated with e-liquid. This step is crucial for preventing dry hits and ensuring a smooth vaping experience.
Step 8: Test the Device
Take a few gentle puffs to test the device. If it’s working properly, you’re all set! If you experience any issues, double-check the rubber plug and ensure the mouthpiece is securely attached.
Tips for Refilling Success
- Use high-quality e-liquids to avoid clogging the coil.
- Avoid overfilling the reservoir to prevent leaks.
- Clean the device regularly to maintain optimal performance.
Final Thoughts
Refilling your iGet Bar Plus is a simple and cost-effective way to extend the life of your device. By following this guide, you can enjoy your favorite e-liquids without the need to purchase a new device every time. For more detailed instructions and tips, check out this how to refill iget bar plus guide.
Happy vaping!
“`
